Capping Machine

Screw capping machine offered by for-bro engineers are widely used in pharmaceutical and chemical industries for tightly cap the bottles. Screw capping machine are available as semi automatic and automatic integrated with cap feeding system and bottle feeding system

these screw capping machine works on the rotating head mechanism where bottle is placed under the rotating head manually and which automatically  seals the cap on the bottle/jar as per the thread on the bottle.

capping machines gives speed of around 1000 to 2400 bottle/hour based on the type of cap and speed of the machine operator.

Salient Feature

•  Wide range of cap supported
•  Standard and gmp models on request
•  Economical solution
•  Adjustable bottle height guage for quick setting
•  Models up to 50mm cap diameter
•  Can support various bottle heights

Technical Specification:

ROPP (Roll over pilfer proof) capping machine offered by For Bro Engineers are part of the End to End solution for your container/bottle filling, sealing and labeling requirements.

Pre-filled bottles/containers are continuously fed from to capping machine thorugh conveyor. The bottles are then slowly fed in to the start wheel
ROPP caps from the orientation unit automatically feeds caps in correct direction before entering into delivery chute. Once the Bottle is positioned below the rotating capping head, out of 4 rollers , two rollers will Skirt, Spins and Seals the cap and and other two roller will provinde threading according to  bottle neck diameter. Once the Cap is tightly sealed on the bottle , rotating head will automatically release the bottle and which in turn will come out of the starr wheel and will be assembled on the rotary table OR can be conved to the inspection station Or labbling stating.

Salient Features
- Single motor synchronies conveyor, starwheels and sealing head.
- Variable speed drive n request
- Integrated control panel for ease of operation
- Special guide for small bottles
- No bottle no capping mechansim
- Sealing pressure can be varied to suit different gauges and sizes of ROPP caps.
- Damaged cap quantity be reduced by adjusting the gap between upper and lower plate of orientation unit

Technical Specifications
- Bottle Diameter - 22 to 60 mm Maximum.
- Bottle Height - 55 mm to 110 mm Maximum.
- ROPP Caps - 22, 25, 28 & 32 mm Diameter
- Speed - upto 60 Bottles /min
- Power requirement - 1.5 HP for conveyor and 0.25 for Feeder

Automatic Screw capping machines offered by For Bron Engineers are with bowl feeder and conveyorised system for tightly capping rigid bottles and containers. Wide variety of capping machines are available including the low cost semi automatic capping machines.

Automatic capping machines are available in standard and GMP models and a dedicated control;l panel
to ensure smooth operations.      

Salient Features:

•  Modular construction
•  Stadnard and GMP models available
•  Geneva star bottle feed mechanism
•  No e bottle /no screw mechanism

Technical Specifications:

Automatic Capping machine offered by For bro Engineers is one of the best multihead ROPP capping machine currently available in industry.

Pre-filled bottles/containers are continuously fed from to capping machine through conveyor. The bottles are then slowly fed in to the start wheel
ROPP caps from the orientation unit automatically feeds caps in correct direction before entering into delivery chute. Once the Bottle is positioned below the rotating capping head, out of 4 rollers , two rollers will Skirt, Spins and Seals the cap and and other two roller will provide threading according to  bottle neck diameter. Once the Cap is tightly sealed on the bottle , rotating head will automatically release the bottle and which in turn will come out of the stare wheel and will be assembled on the rotary table OR can be convey to the inspection station Or labeling stating.

Salient Features
- Single motor synchronizes conveyor, star wheels and sealing head.
- Variable speed drive n request
- Integrated control panel for ease of operation
- Special guide for small bottles
- No bottle no capping mechanism
- Sealing pressure can be varied to suit different gauges and sizes of ROPP caps.
- Damaged cap quantity be reduced by adjusting the gap between upper and lower plate of orientation unit

Technical Specifications
- Bottle Diameter - 22 to 60 mm Maximum.
- Bottle Height - 55 mm to 110 mm Maximum.
- ROPP Caps - 22, 25, 28 & 32 mm Diameter
- Speed - upto 60 Bottles /min
- Power requirement - 1.5 HP for conveyor and 0.25 for Feeder.

 

We offer technically advanced, semi-automatic ROPP screw capping machines for industrial applications to tightly cap bottles.

These semi-automatic capping machine works on the rotating head mechanism where Bottle is placed under the rotating head manually and which automatically  seals the cap on the bottle/jar as per the thread on the bottle.

Machines gives speed of around 1000 to 2400 bottle/hour based on the type of cap and speed of the machine operator.

Salient Feature

•  Standard and GMP models on request
•  Economical solution
•  Adjustable bottle height guage for quick setting
•  Models up to 50mm cap diameter
•  Can support various bottle heights

Technical Specification

Cap pressing machine is used to press HDPE inner cap on firm HDPE bottles . Easy change over for different bottle size. Can accommodate various sizes of the inner. The machine is operated through foot switch